动物狂欢节图画

[1]蒲海洋,王棟,郭安福.一種側方位無避讓立體停車裝置的設計與分析[J].起重運輸機械,2019,(02):75-79.
 Design analysis of a three-dimensional parking device with no lateral avoidance[J].,2019,(02):75-79.
點擊復制

一種側方位無避讓立體停車裝置的設計與分析()
分享到:

《起重運輸機械》[ISSN:1001-0785/CN:11-1888/TN]

卷:
期數:
2019年02期
頁碼:
75-79
欄目:
設計計算
出版日期:
2019-02-28

文章信息/Info

Title:
Design analysis of a three-dimensional parking device with no lateral avoidance
文章編號:
1001-0785(2018)
作者:
蒲海洋王棟郭安福
聊城大學機械與汽車工程學院
關鍵詞:
font-size: 9pt">側方位停車無避讓藍牙控制有限元分析 font-size: 9pt">SolidWorks
分類號:
TH248.3
文獻標志碼:
A
摘要:
摘要:針對目前老舊小區停車困難的問題,提出了一種小型側方位無避讓立體停車裝置的設計方案,首先分析了本裝置的工作原理。其次,采用SolidWorks軟件建立了停車裝置的三維裝配模型,主要包括框架體、存車位、固定機構、電控四大主要部分,并對關鍵部件進行有限元分析。最后設計了裝置的控制系統。本裝置將有效的解決老舊小區停車困難的問題,促進停車設備產業的發展。
Abstract:
Abstract: Based on the current old residential parking difficult problem, this paper proposes a small lateral bearing no collision avoidance stereoscopic parking device of designing scheme. Firstly, this paper analyzes the working principle of this device. Secondly, using the SolidWorks software established assembly model about parking equipment, including the frame body, location fixed body, electronic control. And then, key components are analyzed by finite element method. Finally, the device of control system is designed. This device will effectively solve the problem of old residential area parking difficulty, promoting the development of parking equipment industry.

相似文獻/References:

[1]王增暉.精糖熟化筒倉技術探討[J].起重運輸機械,2019,(02):130.
 Discussion on the technology of refined sugar conditional silos[J].,2019,(02):130.
[2]宋婷,方俊,鄒浩陽,等.港口大型設備狀態評估及管理信息系統的設計[J].起重運輸機械,2019,(06):54.
[3]劉海波.流動式起重機超起卷揚編碼器安裝方式改進[J].起重運輸機械,2019,(06):91.
 Improve on the Installation of Winch Encoder[J].,2019,(02):91.
[4]楊福芹,李冬,趙順.集裝箱裝車機傾斜液壓缸的動力學分析及優化研究[J].起重運輸機械,2019,(02):52.
 Dynamic Analysis Optimization Research of Inclined Hydraulic Cylinder for Container Loader[J].,2019,(02):52.
[5]陳凱凱,安東,彭駿駿,等.DEM-FEM耦合仿真中載荷轉換方法研究[J].起重運輸機械,2019,(02):62.
 Method of Loadings Transformation in the DEM-FEM Co-Simulation[J].,2019,(02):62.
[6]吳西輝,金慶好,楊孟虎,等.潔凈環鏈電動葫蘆橋式起重機的設計[J].起重運輸機械,2019,(02):84.
 [J].,2019,(02):84.
[7]劉立成,趙章焰,魯恩順,等.基于攝影測量的鋼結構應力檢測方法[J].起重運輸機械,2019,(02):91.
 Steel structure stress detection method based on photogrammetry[J].,2019,(02):91.
[8]劉煒,鄭波.高速水霧幕流抑塵技術在抓斗式卸船機上的應用[J].起重運輸機械,2019,(02):108.
 Application of high speed water mist curtain dust suppression technology in grab ship unloader[J].,2019,(02):108.
[9]趙麗媛,張遠,崔學強.基于無線通訊設計的垃圾抓斗橋式起重機[J].起重運輸機械,2019,(02):112.
 [J].,2019,(02):112.
[10]李永.一種全自動軋輥搬運起重機的電氣關鍵技術[J].起重運輸機械,2019,(02):119.
 [J].,2019,(02):119.
[11]胡靜波,馮月貴,賈民平,等.基于RCM的門式起重機維修策略系統研究[J].起重運輸機械,2019,(02):121.
 Research on maintenance strategy system for Gantry crane based on RCM[J].,2019,(02):121.
[12]楊海.基于ADAMS的變幅連桿機構優化分析[J].起重運輸機械,2019,(05):67.
 The optimization analysis of luffing linkage mechanism abased on ADAMS[J].,2019,(02):67.
[13]常嵐,王源磊,司冠楠.電梯安全鉗動作同步性測試研究[J].起重運輸機械,2019,(06):63.
 Research on Synonization Testing of Elevator Safety Clamps[J].,2019,(02):63.

備注/Memo

備注/Memo:
* 基金項目:山東省重大科技創新工程項目(2017CXGC0907)、聊城大學大學生科技文化創新基金項目
收稿日期:2018-08-12
更新日期/Last Update: 2019-04-08
动物狂欢节图画 4505738846907036259842399425689586713680270623234393453319191417460781788243224916898696836398144600 (function(){ var bp = document.createElement('script'); var curProtocol = window.location.protocol.split(':')[0]; if (curProtocol === 'https') { bp.src = 'https://zz.bdstatic.com/linksubmit/push.js'; } else { bp.src = 'http://push.zhanzhang.baidu.com/push.js'; } var s = document.getElementsByTagName("script")[0]; s.parentNode.insertBefore(bp, s); })();