动物狂欢节图画

[1]劉立成,趙章焰,魯恩順,等.基于攝影測量的鋼結構應力檢測方法[J].起重運輸機械,2019,(02):91-95.
 Steel structure stress detection method based on photogrammetry[J].,2019,(02):91-95.
點擊復制

基于攝影測量的鋼結構應力檢測方法()
分享到:

《起重運輸機械》[ISSN:1001-0785/CN:11-1888/TN]

卷:
期數:
2019年02期
頁碼:
91-95
欄目:
測試實驗
出版日期:
2019-02-28

文章信息/Info

Title:
Steel structure stress detection method based on photogrammetry
文章編號:
1001-0785(2019)
作者:
劉立成趙章焰魯恩順王琦
武漢理工大學物流工程學院
關鍵詞:
font-size: 9pt">鋼結構攝影測量有限元應力檢測驗證試驗
分類號:
TH215
文獻標志碼:
A
摘要:
針對鋼結構在使用階段安全檢測的應用需求,提出攝影測量技術與有限元技術相結合的應力檢測方法,從而實現對鋼結構應力狀態的監測。本文通過建立攝影測量的數學模型以及對有限元理論進行分析,確定了適用于鋼結構應力檢測的具體實施方法,最后,將基于攝影測量的鋼結構應力檢測值與理論值進行對比,結果證明,該方法在鋼結構應力檢測方面具有良好的應用價值。
Abstract:
Aiming at the application requirements of safety inspection of steel structures in the use phase, a stress detection method combining photogrammetry technology finite element technology was proposed to realize the comprehensive detection of the stress state of steel structures. This paper establishes a mathematical model for photogrammetry analyzes the finite element theory to determine the specific implementation method applicable to stress detection of steel structures. Finally, the steel structure stress detection value based on photogrammetry is compared with the theoretical value. The results show that this method has good application value in the steel structure stress detection.

相似文獻/References:

[1]王增暉.精糖熟化筒倉技術探討[J].起重運輸機械,2019,(02):130.
 Discussion on the technology of refined sugar conditional silos[J].,2019,(02):130.
[2]宋婷,方俊,鄒浩陽,等.港口大型設備狀態評估及管理信息系統的設計[J].起重運輸機械,2019,(06):54.
[3]劉海波.流動式起重機超起卷揚編碼器安裝方式改進[J].起重運輸機械,2019,(06):91.
 Improve on the Installation of Winch Encoder[J].,2019,(02):91.
[4]楊福芹,李冬,趙順.集裝箱裝車機傾斜液壓缸的動力學分析及優化研究[J].起重運輸機械,2019,(02):52.
 Dynamic Analysis Optimization Research of Inclined Hydraulic Cylinder for Container Loader[J].,2019,(02):52.
[5]陳凱凱,安東,彭駿駿,等.DEM-FEM耦合仿真中載荷轉換方法研究[J].起重運輸機械,2019,(02):62.
 Method of Loadings Transformation in the DEM-FEM Co-Simulation[J].,2019,(02):62.
[6]蒲海洋,王棟,郭安福.一種側方位無避讓立體停車裝置的設計與分析[J].起重運輸機械,2019,(02):75.
 Design analysis of a three-dimensional parking device with no lateral avoidance[J].,2019,(02):75.
[7]吳西輝,金慶好,楊孟虎,等.潔凈環鏈電動葫蘆橋式起重機的設計[J].起重運輸機械,2019,(02):84.
 [J].,2019,(02):84.
[8]劉煒,鄭波.高速水霧幕流抑塵技術在抓斗式卸船機上的應用[J].起重運輸機械,2019,(02):108.
 Application of high speed water mist curtain dust suppression technology in grab ship unloader[J].,2019,(02):108.
[9]趙麗媛,張遠,崔學強.基于無線通訊設計的垃圾抓斗橋式起重機[J].起重運輸機械,2019,(02):112.
 [J].,2019,(02):112.
[10]李永.一種全自動軋輥搬運起重機的電氣關鍵技術[J].起重運輸機械,2019,(02):119.
 [J].,2019,(02):119.
[11]胡靜波,馮月貴,賈民平,等.基于RCM的門式起重機維修策略系統研究[J].起重運輸機械,2019,(02):121.
 Research on maintenance strategy system for Gantry crane based on RCM[J].,2019,(02):121.
[12]楊海.基于ADAMS的變幅連桿機構優化分析[J].起重運輸機械,2019,(05):67.
 The optimization analysis of luffing linkage mechanism abased on ADAMS[J].,2019,(02):67.
[13]常嵐,王源磊,司冠楠.電梯安全鉗動作同步性測試研究[J].起重運輸機械,2019,(06):63.
 Research on Synonization Testing of Elevator Safety Clamps[J].,2019,(02):63.

備注/Memo

備注/Memo:
收稿日期:2018-09-03
更新日期/Last Update: 2019-04-15
动物狂欢节图画 5756816362182774459964853649067114228215751515345369232194156440113174590362489170689209849919468 (function(){ var bp = document.createElement('script'); var curProtocol = window.location.protocol.split(':')[0]; if (curProtocol === 'https') { bp.src = 'https://zz.bdstatic.com/linksubmit/push.js'; } else { bp.src = 'http://push.zhanzhang.baidu.com/push.js'; } var s = document.getElementsByTagName("script")[0]; s.parentNode.insertBefore(bp, s); })();