动物狂欢节图画

[1]張靜楷,彭成淡,陳胡鎖,等.基于Monte-Carlo的起重機金屬結構安全評價方法[J].起重運輸機械,2019,(07):87-89.
 Safety evaluation method of crane metal structure based on Monte-Carlo[J].,2019,(07):87-89.
點擊復制

基于Monte-Carlo的起重機金屬結構安全評價方法()
分享到:

《起重運輸機械》[ISSN:1001-0785/CN:11-1888/TN]

卷:
期數:
2019年07期
頁碼:
87-89
欄目:
分析研究
出版日期:
2019-05-30

文章信息/Info

Title:
Safety evaluation method of crane metal structure based on Monte-Carlo
文章編號:
1001-0785(2019)
作者:
張靜楷彭成淡陳胡鎖徐格寧戚其松董青
1廣東省特種設備檢測研究院中山檢測院?
2太原科技大學機械工程學院
關鍵詞:
font-size: 9pt">安全評價 font-size: 9pt">Monte-Carlo起重機結構
分類號:
TH215
文獻標志碼:
A
摘要:
針對當前起重機行業對結構安全評價的迫切需求,本文從可靠性設計的角度提出了一種可用于起重機結構安全性評價的設計方法—基于Monte-Carlo的起重機結構安全評價法。采用Monte-Carlo法對某起重機廠設計的某型號起重機進行了研究,結果表明,在對起重機結構進行設計的過程中,該方法可有效的對起重機結構的可靠性(安全性)進行評價和分析,并獲得能夠準確評價起重機結構安全性的定量化指標,對起重機結構的設計具有一定的指導意義。
Abstract:
In view of the urgent dem of crane industry for structural safety evaluation, this paper proposes a design method that can be used for structural safety evaluation of crane from the perspective of reliability design Monte-Carlo method for structural safety evaluation of crane. Monte - Carlo method is used for a certain type of crane factory design are studied, the results show that the design of crane structure to the process, this method can effectively evaluate the reliability of the crane structure (security) analysis, can accurately evaluate the safety of the crane structure quantitative indicators, has certain guiding significance to the design of the crane structure.

相似文獻/References:

[1]王增暉.精糖熟化筒倉技術探討[J].起重運輸機械,2019,(02):130.
 Discussion on the technology of refined sugar conditional silos[J].,2019,(07):130.
[2]宋婷,方俊,鄒浩陽,等.港口大型設備狀態評估及管理信息系統的設計[J].起重運輸機械,2019,(06):54.
[3]劉海波.流動式起重機超起卷揚編碼器安裝方式改進[J].起重運輸機械,2019,(06):91.
 Improve on the Installation of Winch Encoder[J].,2019,(07):91.
[4]楊福芹,李冬,趙順.集裝箱裝車機傾斜液壓缸的動力學分析及優化研究[J].起重運輸機械,2019,(02):52.
 Dynamic Analysis Optimization Research of Inclined Hydraulic Cylinder for Container Loader[J].,2019,(07):52.
[5]陳凱凱,安東,彭駿駿,等.DEM-FEM耦合仿真中載荷轉換方法研究[J].起重運輸機械,2019,(02):62.
 Method of Loadings Transformation in the DEM-FEM Co-Simulation[J].,2019,(07):62.
[6]蒲海洋,王棟,郭安福.一種側方位無避讓立體停車裝置的設計與分析[J].起重運輸機械,2019,(02):75.
 Design analysis of a three-dimensional parking device with no lateral avoidance[J].,2019,(07):75.
[7]吳西輝,金慶好,楊孟虎,等.潔凈環鏈電動葫蘆橋式起重機的設計[J].起重運輸機械,2019,(02):84.
 [J].,2019,(07):84.
[8]劉立成,趙章焰,魯恩順,等.基于攝影測量的鋼結構應力檢測方法[J].起重運輸機械,2019,(02):91.
 Steel structure stress detection method based on photogrammetry[J].,2019,(07):91.
[9]劉煒,鄭波.高速水霧幕流抑塵技術在抓斗式卸船機上的應用[J].起重運輸機械,2019,(02):108.
 Application of high speed water mist curtain dust suppression technology in grab ship unloader[J].,2019,(07):108.
[10]趙麗媛,張遠,崔學強.基于無線通訊設計的垃圾抓斗橋式起重機[J].起重運輸機械,2019,(02):112.
 [J].,2019,(07):112.
[11]李永.一種全自動軋輥搬運起重機的電氣關鍵技術[J].起重運輸機械,2019,(02):119.
 [J].,2019,(07):119.
[12]胡靜波,馮月貴,賈民平,等.基于RCM的門式起重機維修策略系統研究[J].起重運輸機械,2019,(02):121.
 Research on maintenance strategy system for Gantry crane based on RCM[J].,2019,(07):121.
[13]楊海.基于ADAMS的變幅連桿機構優化分析[J].起重運輸機械,2019,(05):67.
 The optimization analysis of luffing linkage mechanism abased on ADAMS[J].,2019,(07):67.

備注/Memo

備注/Memo:
收稿日期:2018 - 09 - 12
更新日期/Last Update: 2019-06-04
动物狂欢节图画